A stiff lever, a brake that doesn't return properly, a frayed cable: the issue often comes from the transmission rather than the brake itself. Replacing the cable and housing restores precision to braking, and a new lever gives a solid grip. Suitable for city bikes, hybrid bikes, electric bikes or fixies.
If your bike is parked outside, expect to replace it more often: moisture oxidises the cables.
A brake cable has a larger head than a gear cable, shaped like a pear for road levers or a barrel for flat levers. Choose the right head for your lever and a long enough length, especially on a cargo bike or a long-frame bike. Stainless steel is more resistant to corrosion.
The brake housing is spiralled to resist compression; it differs from gear housing, which has longitudinal wires. An inner Teflon coating reduces friction and makes the lever smoother. Cut it cleanly and add caps to prevent it from crushing.
The lever must be compatible with your brake: a V-Brake requires more cable travel than a caliper or drum brake. On an electric bike, some levers include a sensor that cuts assistance when braking. Adjust the lever's span to the size of your hands: adjustable levers are suitable for small hands and children.
After a winter in the rain, check that the cable slides freely in the housing. A drop of lightweight lubricant at the housing entrance is enough with a standard housing. Also, check the tightness of the cable at the caliper.
After checking the cables, look at the brake pads or disc brakes, pads and discs. The whole selection is in the braking section.
Shimano, a Japanese manufacturer of components, offers hydraulic and mechanical brake levers and brake cables, including the Nexus lever for city bikes.
Sturmey-Archer, a historic British brand of hub gears, has levers for its drum brakes.
Jagwire offers cables, housings, and brake wiring kits, including 50-metre rolls for workshops.
Sunrace, a Taiwanese group owning Sturmey-Archer, offers a complete stainless steel brake cable and housings.
P2R provides brake housings with an inner Teflon coating.
XLC offers levers for V-Brake and cantilever and double-ended brake cables.
Levers, cables, and end-of-line housings are gathered in the clearance parts section, and new arrivals in the new arrivals. Change the cable and housing at the same time.
It is recommended: a new cable in a dirty housing won’t restore its smoothness.
No, the gear housing is not designed for the compression of braking.
With a cable cutter, then reopen the inside before fitting the cap.
A lever compatible with your system, equipped with the same sensor and connector.
A drop of lightweight lubricant is enough with a standard housing; a Teflon housing does not need it.