The seat post connects the saddle to the frame and adjusts your pedalling height. Rigid for simplicity, suspended to absorb bumps and curbs, telescopic to lower the saddle with a single movement at a red light: it is first selected based on the correct diameter, within a tenth of a millimetre, and then according to the desired comfort.
The diameter is engraved on the current post, for example 27.2, 30.9, or 31.6 mm. It must match exactly the seat tube of the frame: a post that’s too thin moves and damages the frame, while one that’s too wide won’t fit. A reduction shim can sometimes be used to adapt a thinner post.
The length should allow for the desired seat height while keeping the post inserted beyond the minimum insertion mark. The setback, meaning the offset of the seat to the back, influences the position: a straight post moves the seat forward, whereas a setback post moves it back. On a city bike, a straight post is often suitable. Also check the total height of the setup with a suspended post, which may be slightly higher.
Detach it from time to time, clean it, and apply a thin layer of grease, or mounting paste for a carbon frame, before putting it back. This prevents it from seizing in the frame. Telescopic and suspended posts require regular maintenance of their seals and mechanisms.
With a new post, it's a good time to change your seat: check out the seats. The entire selection is in the seats and seat posts.
Ergotec offers suspended seat posts of the candle type for city bikes and hybrids.
Fox Factory has telescopic Transfer seat posts and their replacement parts.
Optimiz offers suspended seat posts in aluminium, including a parallelogram model.
Contec provides maintenance kits for its telescopic Drop-A-Gogo post.
crankbrothers offers the telescopic Joplin seat post.
End-of-line seat posts are gathered in the clearance spare parts, and new items in the new arrivals. Check the diameter engraved on your post.
Yes, as long as you choose a model suitable for your weight and the correct diameter.
The clamp is either too loose or worn. Tighten it to the specified torque or replace it.
Yes, if the diameter fits and the control cable can be routed to the handlebars.
Use a penetrating oil for several hours, then gently twist. If it’s stuck, take the bike to a workshop.
Some suspended posts can be adjusted according to the cyclist's weight. Follow the manufacturer's instructions.