A wheel consists of a rim, a hub, and spokes that connect them. When a single part fails, replacing it extends the life of the wheel: new double-walled rim, broken spoke, worn hub, replacement axle or valve. This category also includes hubs with integrated gears, the heart of city bikes without derailleurs.
A rim wears out with the brake pads: when the wear indicator disappears or the track becomes recessed, it needs to be replaced, as it can crack under the pressure of the tyre. A rim that is bent from a shock should also be replaced. Choose the same diameter, the same number of holes, and a width suitable for your tyres.
The double wall rim, with two bridges connected by partitions, is stiffer and better resists shocks than the single wall rim. It is the recommended choice for an electric bike, a cargo bike, or a loaded bike. Eyelets reinforce the spoke holes and prevent cracks. For a wide tyre, a wider rim gives the tyre a better profile and more stability.
An integrated gear hub is chosen with its control: the number of gears and the brand must match.
Changing a valve or an axle is manageable with a few tools. Replacing a spoke requires a spoke wrench and a bit of patience to true the wheel. Reassembling a rim or a hub onto a complete wheel, meaning re-spoking and truing, is usually a job for a workshop.
To avoid re-spoking, a complete wheel can be found in the wheels. The tyres and inner tubes complete the wheel. The entire selection is available in the wheels and tyres.
Shimano, a Japanese component manufacturer, offers integrated gear hubs Nexus and Alfine, in five, seven, or eight speeds.
Velox offers double wall rims for hybrid bikes and a rear wheel with a Torpedo hub.
Sunrace, a Taiwanese group that owns the Sturmey-Archer brand, provides a front hub for city bikes.
Mach1 offers ER10 rims for rim brakes and ER20 for disc brakes, along with stainless steel spokes with nipples.
Rims, hubs, and end-of-line wheel parts are gathered in the clearance parts, and new arrivals can be found in the new arrivals. Count the holes in your rim before ordering.
Count the spokes of the wheel: there are as many as holes, often 32 or 36.
It requires a frame with horizontal dropouts or a chain tensioner, and a compatible control.
Hold the rim and push it sideways: a clicking sound indicates play in the bearings.
Yes, to the correct length, then the wheel can be trued with a spoke wrench.
A tubeless valve with a conical base, suitable for the height of the rim.