At the back of the bike, the cogs receive the chain and wear down with it. A cassette on derailleur bikes, a freewheel screwed onto simpler models, a single cog on a hub with integrated gears or a single speed, a motor cog on an electric bike: replacing worn teeth restores clean gear shifts.
To find out what you have, check if the sprockets turn with the hub when pedalling backwards: a freewheel turns as a single unit.
The cassette is chosen based on the number of speeds and the cassette body of your hub. The gearing, from the smallest to the largest sprocket, determines how easy it is to climb: a large sprocket with more than 40 teeth makes starting with a load easier. Some ranges, like Shimano CUES, are only compatible with their own components.
Worn pointed teeth, a new chain skipping on the small sprockets, or noise when pedalling hard indicate a worn cassette. On a city bike used every day, the cassette usually lasts for two or three chains if they are changed in time.
On an electric bike with a central motor, the front chainring is attached to the motor by a specific mount: its replacement sprocket or chainring must match the motor's generation. At the back, cassettes designed for electric bikes are better at resisting the torque from the motor.
Change the chain at the same time: check the chains and belts. The chainrings and cranksets, the derailleurs and hangers, the shifters and cables, and the hubs with integrated gears complete the transmission. The whole selection is in the transmission.
Shimano, a Japanese component manufacturer, offers CUES LG300 and LG400 cassettes designed for durability, and the Acera HG400 in 8 speeds.
KMC, a Taiwanese chain manufacturer, offers sprockets for Bosch motors and for Enviolo hubs.
Mijnenpieper offers single-speed hub sprockets and a freewheel for electric bikes.
TRP offers the Evo cassette.
Stronglight, a Stéphanois cycling equipment manufacturer, offers sprockets for Bosch electric bike motors.
Cassettes and end-of-line sprockets are grouped in the clearance spare parts, while new arrivals can be found in the new products. Make sure to note the number of speeds and the cassette body before ordering.
A cassette tool and a chain whip, or a suitable freewheel remover for a freewheel.
Often yes, with a spacer, depending on the cassette body. Check compatibility.
If a new chain skips on certain sprockets, the cassette needs changing.
Yes, as long as the derailleur can handle its size.
The chainring or sprocket attached to the motor is specific: it depends on the brand and the generation of the motor.