A fall, a bike lying on its side in the parking area, or a bump in a bike garage is enough to bend the derailleur hanger. This small part, designed to bend in place of the frame, is easy to replace. Replacement hangers by frame model, derailleur cages and pulleys, chain guides and chain guards will get your gears back in order.
The hanger connects the rear derailleur to the frame. Intentionally weaker, it bends on impact to protect the frame and the derailleur. A bent hanger misaligns the derailleur: gears shift poorly, the chain skips, or even the derailleur can hit the spokes. Replacing it is simple and inexpensive.
The mech's body holds two pulleys that guide and tension the chain. Worn pulleys make noise and degrade shifting quality. The chain guide, or chaincatcher, prevents the chain from falling off the chainring, which is very useful with a single chainring or on an electric bike. The front chain guard also protects your trousers.
After changing the hanger, adjust the high and low limit screws, then the cable tension with the dial, until each gear shifts quietly. A slightly bent hanger can be checked with an alignment tool. If in doubt, a workshop can set a derailleur in a few minutes.
Difficult gear changes can also stem from the cable: check the shifters and gear cables. The chains and belts, the cassettes, cogs, and freewheels, the chainrings and cranksets and the hubs with integrated gears complete the transmission. The whole selection is found in the transmission.
Union offers a wide range of replacement derailleur hangers, referenced by frame model.
XLC provides aluminium derailleur hangers, including models for electric bikes.
Leader Fox offers the derailleur hangers for its own bikes.
Nova Ride offers derailleur bodies and hangers compatible with Shimano.
Hebie, a manufacturer from Bielefeld, Germany, offers Chainglider chain guards, including a model for Bosch motors.
Stronglight, a cycling equipment company from Saint-Étienne, offers the Chaincatcher chain guard.
Hangers, bodies and chain guides in clearance are gathered in clearance spare parts, with new arrivals in the new arrivals. Keep a spare hanger in your travel bag.
Sometimes, with an alignment tool. A hanger that has been straightened multiple times becomes fragile: replace it.
Look at the bike from the rear: the derailleur should be perfectly vertical, aligned with the cogs.
No, it is specific to each frame. Only a few recent standards are shared between brands.
It is recommended, especially on cobblestones or with an electric bike, to prevent the chain from falling off.
Stop: the hanger is likely bent or the limit screw is incorrectly adjusted. Check before you set off again.